Woven Badge Standard

Our Polyester textile woven badges are recommended for complex graphics containing photographic elements or multi-colours. Your image is printed woven textile, with water-based polyurethane. It is ideal for badges, emblems, patches, workwear, sports, and fashion clothing.

Custom Badge transfers are suitable for cotton, polyester, blends & uncoated nylons **. Apply them to t-shirts, jackets, hoodies, aprons, ties, caps, bags, umbrellas, Hi-Viz & more.

Applying our transfers couldn't be easier. Press the transfer for 15-20 seconds at 150c°, and remove the garment from the press. That's it!!

  • Suitable for all colour garments
  • 60º wash fastness
  • No limit to the number of colours.    
  • Low-temperature application 
  • Woven finish  



Odoo - Sample 1 for three columns

A6 - 105 x 148mm

Odoo - Sample 1 for three columns

95 x 95mm

Odoo - Sample 1 for three columns

60 x 60mm

Odoo - Sample 1 for three columns

100 x 70mm

Artwork Requirements - Before you order, please take some time to read and follow our artwork requirements.

*Dye migration can occur on polyester garments several days or weeks after a transfer has been applied and the level of migration can differ widely from fabric to fabric.  As such pre-testing is recommended as the same result cannot be guaranteed on all fabrics. All instructions and recommendations are given as a guide.  It is the user’s responsibility to check that the transfers are compatible with the base fabric/material

** These transfers are suitable for uncoated nylon , coated or waterproofed nylons need to be tested.  Pre-testing is recommended as the same result cannot be guaranteed on all nylon fabrics. 

All instructions and recommendations are given as a guide.  It is the user’s responsibility to check that the transfers are compatible with the base fabric/material