Single Colour
Single Colour PLUS Heat Transfers
Our single-colour option is recommended for graphics with single colours. Your image is printed using our off-the-shelf colour range. Any colours required outside this range must be ordered as Full-Colour Transfer.
Single Colour heat applied transfers are suitable for cotton, polyester, blends & uncoated nylon**. Apply them to t-shirts, jackets, hoodies, aprons, ties, caps, bags, umbrellas and more.
Applying our transfers couldn't be easier. Press the transfer for 15-20 seconds at 150c°, remove the garment from the press and peel the backing when cool. That's it!!
- Suitable for all colour garments
- 60º wash fastness.
- Soft hand
- Stretchy print
- Low bleed*
- Low-temperature application
- Cool peel
- Satin finish
- 25 colour shades
Artwork Requirements - Before your order, please take some time to read and follow our artwork requirements.
*Dye migration can occur on polyester garments several days or weeks after a transfer has been applied and the level of migration can differ widely from fabric to fabric. As such pre-testing is recommended as the same result cannot be guaranteed on all fabrics. All instructions and recommendations are given as a guide. It is the user’s responsibility to check that the transfers are compatible with the base fabric/material
** These transfers are suitable for cotton, polyester and uncoated nylon.
Coated or waterproofed nylons need to be tested. Pre-testing is recommended as the same result cannot be guaranteed on all nylon fabrics.
All instructions and recommendations are given as a guide. It is the user’s responsibility to check that the transfers are compatible with the base fabric/material