Full Colour  PLUS   Heat Transfers

Our Full-Colour option is recommended for complex graphics containing photographic elements or multi colours. Your image is printed based on the CMYK values in your art file.

Full-colour heat applied transfers are suitable for cotton, polyester, blends & uncoated nylons **. Apply them to t-shirts, jackets, hoodies, aprons, ties, caps, bags, umbrellas, Hi-Viz & more.

Applying our transfers couldn't be easier. Press the transfer for 15-20 seconds at 150c°, remove the garment from the press and peel the backing when cool. That's it!!

Printed with water-based inks that have a soft velvet-like feel and can stretch and rebound. With low bleed properties built into the formula we have seen super results on polyester garments that normally bleed with other print media*

  • Suitable for all colour garments
  • 60º wash fastness
  • No limit to the number of colours. 
  • Soft hand  
  • Stretchy print 
  • Low bleed* 
  • Low-temperature application 
  • Cool peel 
  • Satin finish  
Odoo - Sample 1 for three columns

A3 - 297 x 420mm

Odoo - Sample 1 for three columns

A4 - 210 x 297mm

Odoo - Sample 1 for three columns

A5 - 148 x 210mm

Odoo - Sample 1 for three columns

A6 - 105 x 148mm

Odoo - Sample 1 for three columns

95 x 95mm

Odoo - Sample 1 for three columns

60 x 60mm

Odoo - Sample 1 for three columns

100 x 70mm

Odoo - Sample 1 for three columns

290 x 90mm

Artwork Requirements - Before you order, please take some time to read and follow our artwork requirements.

*Dye migration can occur on polyester garments several days or weeks after a transfer has been applied and the level of migration can differ widely from fabric to fabric.  As such pre-testing is recommended as the same result cannot be guaranteed on all fabrics. All instructions and recommendations are given as a guide.  It is the user’s responsibility to check that the transfers are compatible with the base fabric/material

** These transfers are suitable for uncoated nylon , coated or waterproofed nylons need to be tested.  Pre-testing is recommended as the same result cannot be guaranteed on all nylon fabrics. 

All instructions and recommendations are given as a guide.  It is the user’s responsibility to check that the transfers are compatible with the base fabric/material